jalexquijano wrote: I want to get rid of the high hiss and noise produced by the level and sustain pots on my stock Boss CS-3. Boss MT-2 More Metal Mod. I wanted to share my notes on the Boss Compression Sustainer CS-3 so if you own one, maybe you'll start enjoying it a little more. I have a stock CS-3 that I'm not too excited by, so I think I'm going to mod it to heck, and hope that the end result is something I really like. These are some mods I'm … my stock CS-3 sounds like what you'd mod that other pedal to, role reversal. Probably not. This is certainly not the "only" method, and there may be some more advanced things you'll want to try such as changing the taper of the Attack or Sustain pots, but these mods have worked well for me. Boss TR-2 Tremolo Mod. just wanted to ask if both the mods (mod 1 and 2) would bring the noise level way way down with your mods. I used it with a Dean Schenker V directly plugged via the CS3 into a Mesa Boogie. Boss DM-2 Low Pass Toggle Mod. that's my take anyway, the stock CS-3 needs no mods. 7,159. Boss BD-2 Blu-Drive Mod. Boss DS-1 Lexi-Drive Mod. I took some time and geeked out over the details and I don't think it deserves its maligned status compared to the … just an uber squish device that couldn't be backed off to a usable sound for me. Boss TR-2 Versa-Trem Boss TR-2 Versa-Trem Mod. Apr 15, 2009 Boston. Second caveat - I haven't gone heavily into the "modded Boss" thing, but actually found I preferred stock to modded (CS3, BD2, SD1) in all cases, save one. The one exception is 11 Gauge has advised on a mod to reduce a hair of bass in the OD-3. I just bought this Boss CS-3 Compressor Supreme Germanium Mod Kit ($19.95) and it is really quite good I must say. Boss GE-7 Magnum Mod. I've used a stock mij CS-3 for years, I went to purchase an MA opto modded CS-3, plugged in and couldn't believe how bad it was. BOSS CS-3 Compressor Mods. For capacitors, I recommend non-polar metal film, polyester, polystyrene, polypropylene, or mylar; I do not recommend ceramic. Boss CS-3 Compression Sustainer Modifications Fromel Electronics from $ 24.95 Boss DS-1 Distortion Modifications Fromel ... Boss MT-2 Metal Zone Mod Kit by Fromel Fromel Electronics from $ 24.95 Boss OD-1 Overdrive Modifications Will the Monte Allums Opto mod plus solve this issue? Do you prefer a stock or modded CS-3? Compressors used as sustainers will boost the gain of the signal as its envelop decays. Boss SD-1 Trans Am Mod. i have a cs-3 and wanted to mod to REALLY lessen the noise, i use it before my dist and od peds, i wanted to use the cs-3 but with my gain at 2:00o'clock, my rig hiss A LOT. I've been playing around with my first batch of pedals, and so far I'm pretty satisfied, Well, half satisfied. Boss TR2 Two Speed Mod. What do you think of the available BOSS CS-3 mods? Considering the sorry state of the stock CS-3, BOSS should hire Monte as a technical consultant! Boss DS-1 Synth Drive Mod. Boss CS-3 Hi-Fi Mod. Crooner Friend of Fred. Comparison of the stock BOSS CS-3 Compressor/Sustainer pedal with the modded version. Combine this with a modified SD-1 Overdrive, and you may well have all the pedals you’ll need for most of your jamming. I have another unmodded CS3 for comparison. Discussion in 'Pedal Pushers Forum' started by Crooner, Jun 22, 2010. After this mod, I rarely if ever turned my new CS-3 off just because it made such a fantastic sound. Boss Delay Pedal Dual Mode Mod.
Swagtron Scooter Manual, Aldi Greek Yogurt Strawberry, En Donde Está Tu Amor Letra, Ainsley Earhardt Long Island, Baby Chick Respiratory Infection,